-40%

12V 24V LCD Relay SSR Diversion/Dump Control/Regulator Sol/Wind/Hyd 2URDC-1224-B

$ 31.67

Availability: 122 in stock
  • Country/Region of Manufacture: United States
  • Voltage: 12V/24V
  • Current Output: 1A Max
  • Model: 2URDC-1224-B
  • Voltage Input: 12V/24V
  • Power Source: Wind
  • Country of Manufacture: United States
  • MPN: 2URDC-1224-B
  • Type: Diversion/Dump Charge Controller
  • Brand: WindAndSunPower.com
  • Condition: New
  • Recommended Environment: Indoor
  • Features: LCD Display
  • All returns accepted: ReturnsNotAccepted
  • Voltage Output: 12V/24V

    Description

    Due to EBAY policy changes, I will be shipping once payment clears.
    DUMP CONTROLLERS – EVOLVED
    LCD UNIVERSAL RELAY DIVERSION CHARGE CONTROLLER
    MODEL 2URDC-1224-B 12V & 24V (Board Version 2.0.X)
    For both EMR’s (ElectroMechanical Relays)
    and SSR’s (Solid State Relays)
    2-STAGE charging using SSR'S
    For Wind, Solar and Hydro
    International First Class Mail only:
    If you don't receive your item within 3 to 4 weeks please contact your postal service with the tracking/customs info. It is out of my hands once a First Class Package leaves the US. Also, it can be extremely slow to some countries (Russia, Italy, Mexico, Philippines, S. Africa, Greece, etc). With possible delays of 2 to 3 months or more.
    DESCRIPTION
    The Universal Relay Diversion Controller
    s
    /Regulators are
    low cost, Microprocessor controlled Diversion/Dump type controller
    s
    designed for the
    System Designer or
    DIY
    (
    D
    o
    I
    t
    Y
    ourselfer)
    . It is designed to switch up to
    8
    conventional automotive style electromechanical relays
    (EMR)
    directly with up to
    1.25A
    @ 40C
    total coil current draw with up to
    32
    0A power handling capability.
    Also unlike other controllers of this type of design, it will also control DC-DC Solid State Relays
    (SSR)
    in Legacy/Conventional
    (Dump)
    diversion mode or use a
    much more efficient
    2-Stage
    charge algorithm. It is theoretically able to directly switch up to
    50
    SSR's at 25ma each
    (untested)
    . If using just 40 amp SSR's that adds up to a potential
    2000
    A
    (
    4000
    A using 80 amp SSR's)
    power handling capability.
    To keep cost down, this controller was designed for the
    System Designer or
    DIY
    (Do It Yourselfer)
    and is the
    BOARD ONLY
    and does
    not
    include an enclosure. It can be mounted directly on a wall in
    an area
    protected from the environment or in
    an
    Optional
    or
    user supplied
    enclosure.
    Please Download and read the Manual before purchasing
    http://windandsunpower.com/Download/2URDC_1224_B_V2_0_Manual.pdf
    FEATURES
    The ability to Directly Switch up to 8 Electromechanical or 50+ DC-DC Solid State Relays
    Legacy
    Dump/Diversion/On-Off
    (
    Electromechanical or Solid State Relays
    )
    2-Stage – Dump/Diversion
    (using
    1
    0ms on

    1
    0ms off or faster SSR's Only!)
    Manual Equalization Mode
    (using
    1
    0ms on

    1
    0ms off or faster SSR's Only!)
    Normally Open Output
    (EMR's and SSR's)
    Normally Closed Output
    (For Special Applications with SSR's Only!)
    12V Adjustable Dump/Diversion/On-Off Set-point
    (13 to 15 Volts
    in 0.05V increments
    )
    12V Adjustable
    Equalization Voltage Set-point
    (1
    4
    to
    1
    5
    .
    75
    Volts using SSR's Only)!
    24V Adjustable Dump/Diversion/On-Off Set-point
    (
    26
    to
    30
    Volts
    in 0.05V increments
    )
    24V Adjustable
    Equalization Voltage Set-point
    (
    28
    to
    31.5
    Volts using SSR's Only!)
    Extremely Low Power Consumption
    (

    2
    5
    ma)
    B
    attery Gauge-divided in
    1
    0% increments (based on Trojan Batteries FLA SOC chart)
    Accurate Battery Volt Meter and Tracking
    (
    ±
    0.2%)
    Switching Speeds Up To
    50
    On-Off Cycles Per Second When Using SSR's
    (

    50
    Hz)
    8-Bit Microcontroller running at 32Mhz
    Latest SMT
    (Surface Mount Technology)
    for Compact Size and Improved Performance
    Self Resetting Fuse
    Relay Powered/Active LED Indicators
    Test/Equalization Button
    Alarms to help diagnose system problems
    Reverse Polarity Protection
    Over Voltage Protection
    Over Current Protection
    Transient/Lightning/Surge Protection
    SPECIFICATIONS
    Min. Operating Volts
    7 VDC
    Max. Operating Volts
    32VDC
    Nominal Operation Voltage
    12VDC or
    24VDC
    Volts Max.
    35VDC
    Max. Power Used
    by Controller

    26ma LCD On

    20ma LCD Off
    Power Sunk @ Ambient Temp.
    -1.25A Max. @ 40C
    -1.00A Max. @ 60C
    12V Dump Voltage Adjustment Range
    13.0 to 15.0 Volts in 0.05V increments
    12V Equalization
    Voltage
    Adj.
    Range
    14.
    00
    to
    15.75
    Volts
    in 0.05V increments
    24V Dump Voltage Adjustment Range
    26.0 to 30.0 Volts in 0.05V increments
    24V Equalization
    Voltage
    Adj.
    Range
    28.00
    to
    31.5
    Volts
    in 0.05V increments
    Relay Connectors Output Voltage
    = Battery Voltage
    Battery SOC Meter/Gauge
    10% Increments
    Battery Voltage Regulation
    (High/Low Volts Using EMR's)
    ± 6% ± 0.93V
    (
    This specification can fluctuate
    widely
    due to system variables and design
    )
    Battery Voltage Regulation
    (High/Low Volts Using SSR's)
    <±0.2% or <±0.07V
    or less Typical
    @ 23C
    (
    This specification can fluctuate due to system variables and design
    )
    LCD Accuracy
    Battery Voltage
    <±0.2% or <±0.07V
    or less Typical @ 23C
    Internal
    Battery Voltage Tracking
    <
    ±
    0
    .2%
    or
    <
    ±0.0
    7
    V
    or less Typical
    @ 23C
    Automotive style ElectroMechanical Relays
    1 up to 8
    30 to 40 Amp with 12/24VDC 160ma coil
    Solid State Relays
    2-Stage & Equal
    DC-DC 1 to 50?

    10ms On or less

    10ms Off or less
    EMR Operating Frequency
    Dump Volt Setting
    Min. 5 Sec. On
    Min. 0.1 Sec. Off
    SSR Operating Freq.
    2-Stage
    Min. 0.01 Sec. On
    Min. 0.01 Sec. Off

    50Hz(On+Off 50 x Sec.)
    Operating Temp.
    Storage Temp.
    -20
    °
    C to
    6
    0
    °
    C
    -50
    °
    C to 150
    °
    C
    Dimensions
    100 mm x 50 mm
    (3.93 in. x 1.96 in.)
    Specifications subject to change without notice.
    Made in USA-Components Made in Rest of World
    WARRANTY:
    WindAndSunPower. Model
    2
    URDC
    -1224
    -B is warranted to be free of defects in material and
    workmanship for three years from the date of purchase. Failure to provide correct installation, operation or care for this product, in accordance with the instruction manual, will void the warranty. Product liability shall be limited to repair or replacement at the discretion of the manufacturer. The manufacturer is not responsible for the labor or other charges necessitated by the removal, transportation, or re-installation of any defective product. Warranty does not cover damage due to, mishandling, abusive conditions, lightning or exposure to weather. No specific claim of merchantability shall be assumed or implied beyond what is printed in this manual. No liability shall exist from circumstances arising from the inability to use this product, or it’s inappropriateness for any specific purpose. In all cases it shall be the responsibility of the customer to insure a safe installation in compliance with local, state and national electrical codes.
    COPYRIGHT© 2010-201
    4
    Jeff Mason
    WindAndSunPower.
    All Rights Reserved
    Powered by
    eBay Turbo Lister
    The free listing tool. List your items fast and easy and manage your active items.