3500W Solar Inverter AC 120VAC 145VDC 48V Battery 50Hz60Hz MPPT 80A Pure Sine US

Description

3500W Solar Hybrid Inverter AC 110vac/120vac DC 48V Battery 50Hz 60Hz MPPT 80A Solar Controller Pure Sine Wave Inverter
Overview:
The is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage &means charging energy storage and AC sine wave output. Thanks to DSP control and advanced controlal gorithm, it has high response speed, high reliability and high industrial standard. Four charging modes are optional, i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging;and two output modes are available, i.e. Inverter and Mains, to meet different application requirements.The solar charging module applies the latest optimized MPPT technology to quickly track the maximum power point of the PV array in any environment and obtain the maximum energy of the solar panel in real time.
Feature
1. Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
2. Two output modes: mains bypass and inverter output; uninterrupted power supply
3. Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging
4. Advanced MPPT technology with an efficiency of 99.9%.
5. Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
6. ON/OFF rocker switch for AC output control.
7. Power saving mode available to reduce no load loss
8. Intelligent variable speed fan to efficiently dissipate heat and extend system life.
9. Lithium battery activation by PV solar or mains, allowing access of lead acid battery and lithium battery
10. 360 all round protection with a number of protection functions.
11. Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.
Basic System Architecture:
The figure below shows the system application scenario of this product. A complete system consists of the following parts:
1. PV module: Convert light energy into DC power, and charge the battery through the all-in-one solar charge inverter, or directly invert into AC power to drive the load.
2. Mains or generator: Connected at the AC input, to power the load while charging the battery. If the mains or generator is not connected, the system can also operate normally, and the load is powered by the battery and PV module.
3. Battery: Provided to ensure normal power supply to the system loads when solar energy is insufficient and the Mains is not connected.
4. Household load: Allow connection of various household and office loads, including refrigerators, lamps, TVs, fans and air conditioners.
5. All-in-one solar charge inverter: The energy conversion unit of the whole system.
Specific system wiring method depends on the actual application scenario.
Models
ISolar MLV3.5KW-U
AC mode
Rated input voltage
110/120VAC
Input voltage range
(90Vac-140Vac)±2%
Frequency
50Hz/ 60Hz (Auto detection)
Frequency Range
47±0.3Hz ~ 55±0.3Hz (50Hz)/57±0.3Hz ~ 65±0.3Hz (60Hz);
Overload/short circuit protection
Circuit breaker
Efficiency
>95%
Conversion time (bypass and inverter)
10ms (typical)
AC reverse protection
Available
Maximum bypass overload current
40A
Inverter mode
Output voltage waveform
Pure sine wave
Rated output power (VA)
3500W
Rated output power (W)
3500W
Power factor
1
Rated output voltage (Vac)
120VAC
Output voltage error
±5%
Output frequency range (Hz)
50Hz ± 0.3Hz/60Hz ± 0.3Hz
Efficiency
>92%
Overload protection
102%
(110%
Load >125% ±10%: report error and turn offthe output after 5 seconds;
Peak power
5000VA
Loaded motor capability
2HP
Output short circuit protection
Circuit breaker
Bypass breaker specifications
40A
Rated battery input voltage
48V (Minimum starting voltage44V)
Battery voltage range
20.0Vdc~33Vdc±0.6Vdc(Undervoltagealarm/shutdownvoltage/overvoltagealarm
overvoltage recovery... settable on LCD screen)
Power saving mode
Load≤50W
AC charging
Battery type
Lead acid or lithium battery
Maximum charge current
40A
Charge current error
± 5Adc
Charge voltage range
40Vdc~60Vdc
Short circuit protection
Circuit breaker and blown fuse
Circuit breaker specifications
40A
Overcharge protection
Alarm and turn off charging after 1 minute
PV charging
Maximum PV open circuit voltage
145VDC
PV operating voltage range
60-145VDC
MPPT voltage range
60-115VDC
Battery voltage range
40-60VDC
Maximum output power
4200W
PV charging current range (can be set)
0-80A
Charging short circuit protection
Blown fuse
Wiring protection
Reverse polarity protection
Certified specifications
Certification
CE(IEC/EN62109-1,-2)ROHS2.0
EMC certification level
EN61000
Operating temperature range
-15°C to 55°C
Storage temperature range
-25°C ~ 60°C
Humidity range
5% to 95% (Conformal coating protection)
Noise
≤60dB
Heat dissipation
Forced air cooling, variable speed of fan
Communication interface
USB/RS485(WiFi/GPRS)/Dry node control
Size (L*W*D)
430mm*338mm*126mm
Weight (kg)
10