LED 6KW DC48V AC120V&240V Split Phase Solar Inverter & Battery Charger Off-grid

Description

Attention:
The same product /weight to different country/zone with different shipping freight,so please consult us.
Before you paying the order, you should see the technical parameter  carefully and confirm the inverter / automatic voltage regulator / stabilizer / solar controller / transformer / uninterrupted power supplier (UPS) can meet your requirement and solve your problem.
Besides, tell me the specification and parameters of what you want to buy; the express address to calculate the shipping freight; the input voltage range and rated output voltage.
Inverter : if you want to buy, please tell us the below parameters:
Where do you need the inverter used for ?
What’s the type of the load and the total load capacity ? (xxx W /xxx KW)
What’s the input DC voltage ? (12V? 24V? or 48V?)
What’s the output  AC voltage do you need?  (220V?  110V?  120V or 120V/240V complementary ? )
What’s the kind of your battery ? (Lead-acid? Colloidal? Lithium or others) If you used the Lithium battery, please share the battery parameters with us to matching the inverter, such as the Rated voltage, Over voltage & Under voltage protecting parameter. unless you will buy it from us.
What’s the type of yo
ur charging power ? (Utility power ? Solar Power ? Or the Generator Power ? )
If you have the solar power, do you need the related MPPT ? If yes, please share the total capacity of solar panels. (xxx W /xxx KW)
If you need the related MPPT, do you need the external single MPPT or the build-in MPPT ? (The build-in MPPT is built into the Inverter as an integrated Inverter. )
♦On inverter
♦High overload ability up to 300% rated power (20 sec)
♦Low quiescent current , power saver mode
♦On battery charger
♦3-step intelligent battery charging
♦Uses PFC (power factor correction) for charger
♦On transfer
♦10ms typical transfer time
♦15s delay before transfer when AC resumes
♦Option
♦Battery / AC priority switch available for off grid solar / wind system
♦Auto generator starter
♦Remote control
♦Battery temperature sensor
♦ On Inverter
• High overload ability up to 300% rated power(20 sec.).
• Low quiescent current, power saver mode
♦ On Battery Charger
• 3- step intelligent battery charging
• Uses PFC(power factor correction) for charger
♦ On Transfer
• 10ms typical transfer time
• 15s delay before transfer when AC resumes
♦ Option
• Battery/AC priority switch Available for off grid solar/wind system
• Auto Generator Starter
• Remote Control
• Battery Temperature Sensor
Feature of PSW7 Series Inverter&Charger
♦ High overload ability of our PSW7 charger is up to 300% rated power(20 sec)
♦ PSW7 pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max.
power from various batteries with different protections, and low voltage trip can be selected (9.5V/10V or 10V/10.5V).
♦ Uses PFC(power factor correction) for charger, which has less power consumption than conventional units.
♦ It has 15s delay before transfer when AC resumes, and overload protection when our PSW7 pure sine wave inverter equips with generator.
♦ 10ms typical transfer time between battery and AC, which guarantees power continuity of PSW7 charger. Uses selectable input AC voltage (184-253V or 154-253V) for different kinds of loads.
♦ Our PSW7 charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90Amp.
♦ It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries.
♦ LCD status display, battery/AC priority switch, USB communication port are available for our PSW7 pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting,and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.
Slide to the left for full table
PSW7 Pure Sine wave Inverter/Charger
Inverter Output
Model
PSW7-
PSW7-
PSW7-
PSW7-
PSW7-
PSW7-
PSW7-
1000W
1500W
2000W
3000W
4000W
5000W
6000W
Continuous Output Power
1000W
1500W
2000W
3000W
4000W
5000W
6000W
Surge Rating(20s)
3000W
4500W
6000W
9000W
12000W
15000W
18000W
Capable of Starting Electric Motor
1HP
1.5HP
2HP
3HP
4HP
5HP
6HP
Output Waveform
Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency
>88%(Peak)
Line Mode Efficiency
>95%
Power Factor
0.9-1.0
Nominal Output Voltage rms
100-110-120Vac / 220-230-240Vac
Output Voltage Regulation
±10% RMS
Output Frequency
50/60Hz ± 0.3Hz
Short Circuit Protection
Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time
10ms(Max)
THD
< 10%
DC Input
Nominal Input Voltage
12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage
10.0Vdc
Low Battery Alarm
10.5Vdc / 11.0Vdc
Low Battery Trip
10.0Vdc / 10.5Vdc
High Voltage Alarm & Fault
16.0Vdc
High DC Input Recovery
15.5Vdc
Low Battery voltage recover
13.0Vdc
Idle Consumption-Search Mode
< 25 W when Power Saver On
Charge
Input Voltage Range
Wide: 90~135VAC / 164~243VAC;
Narraw: 100~135VAC / 194~243VAC;
Output Voltage
Depends on battery type
Charger Breaker Rating
10A
10A
10A
20A
20A
30A
30A
Max Charge Rate
35A / 70-90A Max (Charger Current Control)
Over Charge Protection Shutdown
15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current)4Step Digital Controlled Progressive Charge
Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery type
Fast Vdc
Float Vdc
Gel U.S.A
14
13.7
A.G.M 1
14.1
13.4
A.G.M 2
14.6
13.7
Sealed Lead Acid
14.4
13.6
Gel Euro
14.4
13.8
Open Lead Acid
14.8
13.3
Calcium
15.1
13.6
De-sulphation
15.5 for 4hrs
Remote Control
Yes. Optional
Bypass & Protection
Input Voltage Waveform
Sine wave (Grid or Generator)
Nominal Voltage
120Vac
230Vac
Low Voltage Trip
80V/90V±4%
184V/154V±4%
Low Voltage re engage
90V/100V±4%
194V/164V±4%
High Voltage Trip
140V±4%
253V±4%
High Voltage re engage
135V±4%
243V±4%
Max Input AC Voltage
150VAC
270VAC
Nominal Input Frequency
50Hz or 60Hz (Auto detect)
Low Freq Trip
47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
Low Freq re engage
48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz
High Freq Trip
55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
High Freq re engage
54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz
Output Short circuit protection
Circuit breaker
Bypass breaker rating
10A
15A
20A
30A
30A
40A
40A
Transfer switch rating
30amp for UL & TUV
40amp for UL
Max bypass current
30amp
40amp
Mechanical Specification
Mounting
Wall mount
Inverter Dimensions(L*W*H)
382*218*179mm
442*218*179mm
598*218*179mm
Inverter Weight
16KG
17KG
20KG
24KG
35KG
45KG
45KG
Shipping Dimensions(L*W*H)
520*315*300mm
580*315*300mm
740*315*300mm
Shipping Weight
18KG
19KG
22KG
26KG
37KG
47KG
47KG
Display
Status LEDs / Status LEDs+LCD
Standard Warranty
1 Year
On the rear panel of inverter, there are 5 DIP switches which enable users to customize the performance of the device.
Switch NO
Switch Function
Position: 0
Position: 1
SW1
Low Battery Trip Volt
10.0VDC
For Deep-Cycle Battery
10.5VDC
For Starting Battery
*2for24Vdc,*for48Vdc
SW2
AC Input Range
AC Source
For Utility Mode
For Generator Mode
230Vac HV
184-253Vac
140-270Vac
120Vac LV
100-135Vac
90-135Vac
SW3
Power Saver Auto Setting
Night Charger Function
Detect Load Per 3Secs
SW4
O/P Frequency Setting
50Hz
60Hz
SW5
Solar/AC Priority Setting
Utility Priority
Battery Priority
Low Battery Trip Volt:
The Low Battery Trip Volt is set at 10.0VDC by default. It can be customized to 10.5VDC.
AC Input Range:
There are different acceptable AC input ranges for different kinds of loads.
It can be customized from 184-253VAC to 154-253VAC.
Load Sensing Cycle:
The inverter is factory defaulted to detect load for 250ms in every 30 seconds. This cycle can be customized
to 3 seconds thru the SW3 on DIP switch.
AC/Battery Priority:
Our inverter is designed AC priority by default. This means, when AC input is present, the battery will be
charged first, and the inverter will transfer the input AC to power the load.
The AC Priority and Battery Priority switch is available upon request. When you choose battery priority, the
inverter will inverting from battery despite the AC input.